| 
Our company`s chemistry shining series products use chemistry
shining principle.The products can shine red, yellow, blue,
green, orange,white,purple and other colours. Two different
types of chemicals are stored in two tubes ,an outer large
one and an inner glass vial.The inner glass vial is placed
inside the large outer tube and floats in the outer tube`s
chemical. In the plastic tube is ATBC , in the glass tube
is the solution which the amyl ester and the fluorescence
pigment mixes. In snapping off in the process, in glass tube
liquid A flows out, rapidly with the plastic tube material
in liquid B mixes, it is occured the chemical reaction.
Energy transmission that emit fluorescence pigment molecule
in chemical reaction, fluorescence pigment thus form that
it is obvious releases energy . This kind transforms chemical
energy into the course of the luminescence energy,this is
called chemistry shining.

The light stick's shining time at present by 4 hours - 48
hours.
The time of light stick shining and the environment has
the inverse ratio (namely: The temperature is higher, the
light stick shone the time is shorter), has the inverse ratio
with the light stick initial brightness (light stick just
snaps brightly , shining time is shorter).
According to light stick`s these characteristics, light
stick can be lasted shone ,we can put in the low temperature
environment (for example: Refrigerator, cold cabinet). May
suppress in the light stick two kinds of liquids chemical
reactions, after takes out may continue to use.

Lets us personally do the small experiment!
Operation :
Three shining light sticks,it must be caused the glass tube
to break off, and shaked completely.
Shining light stick one inserts in 0 ℃ ice water, another
inserts 40 ℃ above in the hot water, third preservation in
warm water environment.
Observation result:
Three shining light stick all starts to shine. In the ice
water shines luminous intensity is weakest, but shining time
is longest; In the room temperature shines the good luminous
intensity comes between, shining time comes between ; But
in the hot water shines the good luminous intensity is strongest,
but shining time is shortest.
Reason:
Because of shining in the light stick chemical energy by
the energy of light form release energy, but is not the heat
energy. When the temperature is higher ,the chemical reaction
speeds go up, when reduces the temperature by rights, the
chemical reaction speed reduces. After you snapped the light
stick,put the shining light stick in the refrigerator, after
perhaps half a year, it can be shone the weak light!

Two different types of chemicals are stored in two tubes
,an outer large one and an inner glass vial.The inner glass
vial is placed inside the large outer tube and floats in the
outer tube`s chemical.In the breaking off process, in glass
tube liquid A flows out. Rapidly mixes with plastic tube in
liquid B, it is occured the chemical reaction,by the chemical
energy transformation to the luminesecence energy.
Liquid B is hydrogen peroxide solution H2O2 dissolved in
the solution of the solvent, liquid A is dissolved in the
solution of the solvent of a variety different fluorescence
pigment and amyl ester (CIPO) .
1, (CIPO)
2, Bis (2, 4, 5-trichlro-6-n-pentoxycarbonylphenyl) oxalate
Molecular formula: C26H24C16O8

Because in the light stick chemical liquid substance is
packed by the polyethylene (plastic) , also non-toxic and
harmless, therefore cannot injure the human body. The light
stick sends out the nonradioactive light which the chemical
reaction is dye sends out, cannot injure the human body.

The light stick is composed with two kinds of different
materials, the plastic tubes and the glass tube, the usage
is snapping the light stick, breaking off the glass tube gently
,causes two kinds of liquids intensive mixing, achieves best
shining effect.

Leare packer unopened until just before use. Like these
circumstances are prohibited,break up the plastic tube, cutting
light sticks ` plastic tube. If the liquid is divulged,it
is easy to pollute the furniture, the floor, the clothing,
the skin and so on. If has above the situation must promptly
clean. If in the light stick liquid enters in the eye, must
promptly wash with the clean water or go to hospital in time
.
Pay attention to prevent the child to eat by mistake ,put
the light stick out of children reach.

The light stick should not be store in high temperature
or sunlight ,must be handle with care in the transportation
and the storage process . Avoiding the light stick shining
time is shorter before using ,as well as breaking light stick
`s glass tube.
|